Micromod Micro-DCI: 53SL5100B Single Loop Controller Uživatelský manuál stáhnout pdf (Strana 9)

53SL5100B Single-Loop Controller

INSTRUCTION MANUAL

Item Specification(s)

Environmental Characteristics

Controlled Environment Enclosed temperature controlled location (Class A and B per ISA-

S71.01 1985)

Ambient Temperature Limits 4 -52°C (40 - 125°F)

Relative Humidity Limits 10 - 90% maximum

Temperature Effects on Accuracy ± 0.28% per 28°C (50°F) change from reference temperature 25°C

(77°F)

Transient Immunity (all circuits) ANSI C37.90a - 1974/IEEE Std 472-974: Ring Wave: 1.5 MHz, 3 kV,

60 pulses/s for 2.0 s

EMI Susceptibility SAMA PMC 33.1-1978: Class 3-abc: no effect at 30 V/m, at 27, 146,

and 446 MHz

Enclosure Classification/Environment Panel Mounted Equipment: No enclosure rating. Designed to be

installed in a user provided panel or enclosure.

Rated for installation in a Pollution Degree 2 location per U.L. 508-

1989/Controlled Environment per CSA C22.2 No. 142-M1987. An

indoor, temperature controlled location (Control Room or Shop Floor)

where normally, only non-conductive pollution occurs; however,

temporary conductivity caused by condensation may be expected.

Location in environments more severe than those stated requires

supplementary protection

Shock 0.5g

Vibration SAMA PMC 31.1-1978; point-to-point constant displacement 0.05 in.

(1.27 mm), 5 -14 Hz: 0.5 g, 14 - 200 Hz.

Drop and Topple SAMA PMC 31.1-1978; Tilt 30 degrees from horizontal and fall freely

to a hard surface, all sides, front and back.

Safety Classification General Purpose: Complies with ANSI/ISA S82.01-1988, Safety

Standard for Electrical and Electronic Test Measuring, Controlling and

Related Equipment; General Requirements and S82.03-1988 Safety

Standard for Electrical and Electronic Test, Measuring, Controlling and

Related Equipment; Electrical and Electronic Process Measurement

and Control Equipment.

FM Approved: Nonincendive for Class 1, Division 2, Groups A, B, C, &

D, Temperature Code T3C 160 ° C.

Physical Characteristics

Material of Construction:

Case Steel, black enamel

Circuit Boards Glass epoxy

Bezel ULTEM 1000 (Polyethermide Resin) Flammability-UL94 5V

Dimensions 2.844W x 5.656H x 12.906L (inches) 73W x 144H x 329L (mm)

Flush Panel Mounting 0.125 inch - 1 inch thickness (3.2 mm - 25.4 mm)

Electrical Connections Screw type terminal block at rear of casework

Weight 5 lbs (2.3 kg)

Front Panel Display 96 x 48 dot addressable

Front Panel Push Buttons 10 membrane type switches

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 114 115

Komentáře k této Příručce

Žádné komentáře

Micromod Micro-DCI: 53SL5100B Single Loop Controller Uživatelský manuál Strana 9

Komentáře k této Příručce

Související produkty a manuály pro Zařízení Micromod Micro-DCI: 53SL5100B Single Loop Controller