Micromod MOD: ICN OPC Server Users Guide Uživatelský manuál stáhnout pdf (Strana 19)

ICN OPC Server

Application Tutorial

Figure 3 .5.

Port Properties

• Select the COMM port from the drop-down menu in the Port field and then enable

it by checking the box next to the Enable field.

• Choose the Baud Rate, Parity, Flow Control, Data bits and Stop bits from this

dialog box. Make sure these entries match the settings of the instrument.

• Click on OK to complete the Port configuration.

• Click on OK. The added device will be displayed in the Device Tree on the left

frame as shown in the next figure:

Figure 3 .6.

ABB ICN OPC

Server database

4. Save the database: The OPC tag database can be save as a file with an extension .ICNS

• Select File – Save from the menu bar. Refer to the following figure.

• The Save As dialog box will be displayed next as shown below:

• Choose the same folder where you have saved the instrument database for saving

this file and then type a name for the OPC tag database file in the File name field.

3 - 5

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 37 38

Žádné komentáře

Micromod MOD: ICN OPC Server Users Guide Uživatelský manuál Strana 19